yes , because the seal is behind the torque converter
Remove transmission and replace front seal.
Front seal: remove engine or transmission and replace the seal. Rear seal, remove the drive shaft to replace the seal. Unfortunately, you typically only have problems with the front seal.
Jack up the front remove front tires, move inner splash guard reach in with a LONG extension, remove and replace plugs
You need to remove the front tires to change the front brake pads on a 1993 Aerostar. So the new pads fit, you need to squeeze the caliper back, and then tap out the slide rails. Remove the old pads and replace with new ones and reassemble.
No, they are two completely different designs. aerostar is rear wheel drive ,taurus front wheel drive.
Lift the car on a jack, remove the tire, remove the brake shoe/caliper and remove the old brake pad. Put in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car to the ground.
remove the transmission and torque converter. Remove the bolts from the pump (front of transmission case) and remove the pump.
It is a involved procedure , if you have to ask then you shouldn't be doing that. the whole frame in the front has to come out.
just so you know everything has to be taken off the front end of a 96' DeVille to remove the transmission, includind the fenders.
You have to remove the front wheels to gain access to the spark plugs.
Should be of the "peel off" type remove wheel Remove caliper mounting bolts Remove and support caliper remove rotor
The front transmission line leaks, how do I replace it?