0
Add your answer:
Earn +20 pts
Why wont your 2001 Chevy shift out of first gear?
You proble need a new Trany I would check you fluids ! Check all lines and plugs for the Trany.
Will a Chevy 3 speed trany bolt to a dodge belt housing?
It'll require an adaptor
What type of transmission fluid is required for a 2002 Chevy Avalanche?
i have a 2002 chevy avalanche1500 had transmission fluid changed about 3 months ago i just noticed a little slip and checked the trany fluid it is 2qts over can that hurt the trany and what type of fluid is required
Why would a 1997 Chevy Cavalier rev up before changing gears and change gears to much?
In an automatic transmission this usually means the trany is low on fluid or the trany has internal problems.
Will a 75 inline 6 trany 4 speed fit a Chevy 305?
yes it will work you will be geared low
93 Chevy lumina z34 revs but wont move past 10 mph?
Trany shot replace
What is a trany?
Trany is short for transmission.
What does it mean if there is oil in antifreeze?
Probably the trany cooler in the rad has let go. If this is the case then the coolant is in the trany also. check the trany for coolant and if it is you will need a trany very soon. I've tried flushing the trany when this has happened in the past and have yet to save a trany. Usually within 3-6 week the trany stops working.
Will the transmission from a 98 Chevy Z71 work in a 95 Chevy Z71?
no 998 trany has different sensors and diff shift points the computer wont no when to tell it to up shift or down shift
Why wont your 2003 Chevy Trailblazer go backwards?
small leak at the cooler lines and now you are down about oen quart of trany fluid
What does a PAN do?
trany pan is the oil reservoir for the trany. Also provides access to the filter, valve body & trany internal components
97 Hyundai Elantra auto trany 18 ltr eng the trany will not shift into any of the drive gears but does shift into reverse and will move in reverse when its trying to shift makes constant ticking sound?
check the transaxle range switch and positioning....the holes should line up in neutral
