Peugeot 307

The spanner symbol on the dashboard of a Peugeot 307 indicates that the vehicle is due for a service or maintenance check. It serves as a reminder for the driver to schedule an appointment for routine maintenance, such as an oil change or inspection. If the light remains on after servicing, it may require resetting to turn off the warning indicator.

To remove the seats in a Peugeot 307CC, start by sliding the seat forward to access the rear bolts. Use a socket wrench to remove the bolts securing the seat to the floor. Once the bolts are removed, gently lift the seat out while disconnecting any electrical connectors if present. Finally, repeat the process for the other seat if necessary.

To remove the battery cover on a Peugeot 307 CC, first, ensure the vehicle is turned off and the key is removed from the ignition. Locate the clips or screws securing the battery cover, typically found on the top or sides. Gently release the clips or unscrew the fasteners, then lift the cover off to access the battery underneath. Always exercise caution when working near the battery to avoid any electrical hazards.

Brakes can catch fire due to excessive heat generated from prolonged or aggressive braking, which causes brake components, particularly the friction material, to overheat. This can lead to the ignition of flammable materials, such as brake pads or surrounding components, especially if they are worn or damaged. Additionally, brake fluid leaks or other flammable substances in the vicinity can contribute to the risk of fire. Proper maintenance and avoiding excessive braking can help prevent this hazardous situation.

The minimum thickness for the front brake rotors on a Peugeot 307 is typically around 24 mm, though this can vary slightly depending on the specific model and year. It's essential to consult the vehicle's service manual or a professional mechanic for the exact specification relevant to your specific model. Always ensure that rotors are replaced or resurfaced according to manufacturer guidelines for optimal safety and performance.

To clean the ABS sensors on a Peugeot 307, first ensure the vehicle is securely lifted and supported. Locate the ABS sensor on each wheel hub, disconnect the electrical connector, and carefully remove the sensor. Use a soft cloth or a brush with mild cleaning solution to clean any dirt or debris from the sensor. Reinstall the sensor, reconnect the electrical connector, and ensure everything is secure before lowering the vehicle.

In a Peugeot 307 SW, the jack is typically located in the trunk area, specifically under the floor mat or within a side compartment. You may need to remove the spare tire cover or any storage trays to access it. Always consult the vehicle's owner manual for exact details and instructions on using the jack safely.

The recommended tire pressure for a Peugeot 307 with a 2-liter engine typically ranges from 30 to 32 psi (pounds per square inch) for the front tires and 28 to 30 psi for the rear tires. However, it's essential to check the owner's manual or the tire placard located on the driver's side door for the exact specifications, as they can vary based on load and driving conditions. Always ensure tires are properly inflated for optimal performance and safety.

The secondary air pump on a Peugeot 307 helps to reduce emissions during cold start conditions by injecting fresh air into the exhaust system. This additional air enhances the combustion of unburned fuel in the exhaust, allowing for more complete oxidation of hydrocarbons and carbon monoxide. The pump is activated by the engine control unit (ECU) when the engine is cold, typically during the first few minutes of operation. Once the engine reaches optimal operating temperature, the pump is deactivated.

To change the pollen filter in a Peugeot 806, start by locating the filter compartment, which is typically found behind the glove box. Remove the glove box by unscrewing any screws and detaching it carefully. Once exposed, unclip the old pollen filter and slide it out, then insert the new filter in the same orientation. Finally, reassemble the glove box to complete the process.

To unlock the passenger door of a Peugeot 307, you can use the key fob to remotely unlock the vehicle or manually unlock it using the key in the door lock. If the remote is not functioning, insert the key into the passenger door lock and turn it to unlock. Additionally, if you have access to the driver's side, unlocking that door will also unlock all the other doors, including the passenger side.

To open the boot of a Peugeot Cabriolet 307 without the key, you can try accessing the emergency release mechanism, if available. This might involve folding down the rear seats and reaching into the trunk area. Alternatively, you could use a slim jim or similar tool to manipulate the locking mechanism from the outside, but this requires some skill and caution to avoid damaging the vehicle. If these methods don't work, it's best to contact a locksmith or a Peugeot dealership for assistance.

To display the remaining fuel on your Peugeot 307, turn on the ignition without starting the engine. Use the trip computer button on the stalk or dashboard to cycle through the display options until you see the fuel gauge or the distance to empty. This should show you how much fuel you have left in the tank. If necessary, consult the owner's manual for specific instructions related to your model year.

The recommended engine oil for a Peugeot 307 1.6 petrol is typically a synthetic oil with a viscosity grade of 5W-30 or 5W-40, meeting the PSA B71 2290 or B71 2291 specifications. It's essential to check the vehicle's owner manual for specific recommendations, as oil requirements may vary based on the model year and engine variant. Always ensure that the oil meets the necessary standards for optimal performance and longevity.

To change the tensioner pulley on a Peugeot 307 2.0 HDi turbo, first, disconnect the battery and remove any components obstructing access to the serpentine belt. Release the tension on the belt using a suitable tool to turn the tensioner pulley clockwise, then carefully remove the belt. Unbolt the old tensioner pulley from its mounting, replace it with the new pulley, and reassemble everything by reversing the steps. Finally, ensure the belt is properly routed and tensioned before reconnecting the battery and starting the engine.

The fuel filter on a Peugeot 307 1.4 16v petrol is typically located underneath the car, along the fuel line. It is often found near the fuel tank or along the chassis rail. To access it, you may need to lift the vehicle and remove any protective covers. Always consult the vehicle's service manual for specific instructions and safety precautions.

To change the indicator stalk on a 2003 Iveco Daily, first disconnect the vehicle's battery to ensure safety. Remove the steering column cover by unscrewing the fasteners, then detach the old indicator stalk by unplugging the wiring connector. Install the new stalk by reversing the process: connect the wiring, secure the stalk in place, and reattach the steering column cover before reconnecting the battery. Test the new stalk to ensure it functions correctly before driving.

To remove the spare wheel from a Peugeot 307, first, locate the spare wheel compartment, usually found in the trunk under the floor panel. Lift the panel and use the provided tools to loosen the securing bolt or clamp that holds the spare wheel in place. Once it's loose, carefully lift the spare wheel out of the compartment. Finally, ensure everything is securely placed back in the trunk before closing it.

The fuse for the reverse light on a Peugeot 307 is typically located in the fuse box under the dashboard on the driver's side. You can find the fuse box cover labeled with a diagram indicating the specific fuse for the reverse lights. Refer to the owner's manual for precise fuse location and specifications to ensure you're checking the correct one. If the fuse is intact, the issue may lie elsewhere in the reverse light circuit.

The timing belt on a Peugeot 307 2.0L petrol engine should typically be changed every 120,000 kilometers (about 75,000 miles) or every 10 years, whichever comes first. However, it's essential to consult the owner's manual or a professional mechanic, as maintenance schedules may vary based on driving conditions and specific engine configurations. Regular inspections can help identify any signs of wear or damage that may necessitate an earlier replacement.

The lambda sensor on a Peugeot 307 is typically located in the exhaust system, specifically before and after the catalytic converter. The upstream (pre-catalytic) sensor is generally found near the engine, attached to the exhaust manifold or pipe, while the downstream (post-catalytic) sensor is positioned after the catalytic converter. Depending on the engine type, the exact placement may vary slightly, so consulting the vehicle's service manual can provide precise details for your specific model.

To remove a wheel from a Peugeot 307, first ensure the vehicle is on a flat surface and securely supported by jack stands. Loosen the wheel nuts slightly before lifting the car with a jack. Once elevated, fully remove the wheel nuts using a wrench and carefully take off the wheel. Always ensure to re-tighten the wheel nuts in a star pattern when installing the wheel back on.

The Peugeot 307 typically has two reverse lights, one on each side of the rear of the vehicle. These lights activate when the transmission is in reverse to alert other drivers and pedestrians. If you're unsure, you can check the vehicle's manual or inspect the rear lights directly.

To manually adjust the headlight height on a Peugeot 307, locate the headlight adjustment screws, typically found on the back or side of the headlight assembly. Use a screwdriver to turn the screws: turning them clockwise usually raises the beam, while counterclockwise lowers it. It's best to adjust the headlights with the vehicle on a level surface and facing a wall to ensure proper alignment. Always check the beam pattern after making adjustments to confirm they are correctly set.

The thermostat on a Peugeot 307 is typically located near the engine, often at the junction where the upper radiator hose connects to the engine block. It is housed within the thermostat housing, which is usually situated on the engine's front or side, depending on the engine variant. To access it, you may need to remove the engine cover and possibly other components, depending on the specific model and engine type. Always consult the vehicle's service manual for detailed instructions specific to your model.