Try some JB Weld or similar product. If the crack is where the oil plug/cap goes, you want to ensure that you do not "weld" the plug/cap to the threads = in this case you want to "extend" the drain tube with a short piece of threaded pipe before applying the product.
Open the drain valve on the side of the engine block.
The 2002 Tacoma engine block will have two coolant drain plugs on each side of the block. The coolant drain plugs will be near the front and the rear of the engine block.
on the buttom of the block Can you please be more specific? Where exactly on the bottom of the block? Near what on the block?
On the bottom of the engine block. It has a drain plug in it for draining the oil.On the bottom of the engine block. It has a drain plug in it for draining the oil.
The engine block drain plug on a 2004 Hyundai is on the bottom of the block. It is on the back, very accessible behind the starter.
The coolant drain plug on a Nissan Micra engine block is on the upper part of the block. It is under the intake manifold.
Most vehicles have a drain on both.
There is no engine block drain plug on a 1996 Chevy Lumina. You drain from the radiator using the plastic plug at the bottom.
where is the coolant drain plug on the engine block of Honda ACCORD 2.4 2006
The engine drain plug for 6 cylinder is on the lower left side of engine block.
The 1994 Lincoln Town Car 4.6 liter engine coolant drain plugs can be found on each side of the engine block. There will be a total of four engine coolant drain plugs.
The engine has a drain plug located on the engine block. Look closely and you will find it.