you replace the spring tensioner or the belt because there are no adjustments.
when u pop the hood there is a diagram that shows the belt pattern
take it to a garage and get if fixed
loosen the tensioner bracket, remove old belt. replace with new belt. tighten with tensioner. job complete!
CHANGING ALTENATOR BELT: 1. loosen compressor bolts push towards engine to remove compressor belt 2. loosen power steering bolts and push pump towards engine to get slack to remove belt. 3. loosen altenator bolts pus it towards motor to get slack and remove belt. 4. put new belt on push altenator away from motor to tighten slack in belt and tighten bolts 5. push power steering pump away from motor to tighten belt and tighten bolts 6. push compressor away from motor to tighten belt and tighten bolts. REMOVE FAN BELT: Do steps 1,2,5 and 6 REMOVE COMPRESSOR BELT: Do steps 1and 6
how do you tighten fan belt on l200
Loosen up the power steering pump and pull on pump till belt is tight.
just in front of the altenator, there is a 10mm bolt, tighten that and it will tighten the fan belt
To tighten a loose drive belt, find the pully that is connected to the belt. Tighten the pully and then hold the belt in place using the adjuster belt. Check out the related video to see an example of how this is done.
how do u tighten belt on brute force 750?
You can tighten a fan belt by tightening the tensioner pulley. Pry to the left on the tensioner pulley and tighten it.
Tighten power steering belt 2002diamonte
first you have to locate the allready plced soket and then just tighten the belt