I am assuming that you have a 4X4 and are talking about the front hubs. In which case, they are a sealed unit with the ABS sensor integrated and they come as a package. They can not be greased or serviced. The only real part that can be serviced is the needle bearings on the actual hub assembly, but that should not really be necessary. I re greased mine when I changed the bearings. tdwills@atlanticbb.net
Years Ago One Had To Repack The Bearings With Grease After Cleaning As A PM Measure...Today One Just Replaces The Hub Assemble And You Are Installing A New Bearing That Is Pre-Greased And Last Around 70,000 Miles.
will a ABS hub assembly fit on anon ABS assembly hub for 2005 buick lacrosse
Purchase new hubs complete with pre-greased bearings. (About $160.00 each). Remove caliper and disc. Remove old hub. Replace new hub, disc and caliper. Voila!
The hub/bearing assembly is pressed together. This item is not serviceable.
how do i replace the hub assembly on a 1997 cavalier 2.3 Ls
Hard to answer your question when there isn't one what do you need to know about a hub assembly
With a Wheel Bearing Hub Assembly, you might get both the wheel bearing and the hub assembly. Sometimes, especially with FWD vehicles, the front hubs will not have the bearing with them but the rear hub assembly will. Most part manufacturers will follow what ever the auto company recommends.
they are sealed and non servicable. they cannot be greased
most places sell the complete hub assembly. You have to remove the brake assembly there are four bolts holding the hub assembly in place remove and reinstall
volleyball, In automotive terms a hub would be what the tire and rim assembly bolts to.
You don't. In the 1991 Pontiac Grand Am, the wheel/hub assembly is pre-built at the factory and as such, can not be disassembled for maintenance. If you are having trouble with lubrication or worn bearings, you must replace the entire assembly.