you may have to also upgrade light relay other than relay and plug the wiring will handle it
How to install headlights to a BMW 528i?
Remove the wiring harness from the back of your 1997 Chevrolet Z71 headlights. Remove the headlight retaining bolts. The headlights will come out. Reverse the process to install the new headlights.
Remove the wiring harness from the back of your 2003 VW Jetta. Remove the headlight assembly retaining bolts. The headlights will come out. Reverse the process to install your new headlights.
Should be coming out of the wiring harness on each side of the car, where the harness is fastened to the radiator support. The ground is bolted to the radiator support on both right and left sides near the headlights- on the back of the radiator support
Begin by removing the wiring harness from the back of your headlight assembly. Remove the headlight assembly retaining bolts. Reverse the process to install your new LHD headlights.
good luck trying tio find one
Remove the wiring harness from the back of the headlights. Remove the headlight retaining bolts. Remove the headlight. Reverse the process to install the new headlight.
No. the 99 has 2 headlights on each side and the 2000 has 1 on each side. A different wire harness. And the 2000 light housings are a wee-bit larger.
Not Always, On A few nissans, I have found that the problem was actually the harness and not the sensor. This may save you a bit of money!
you will need the wire harness and radiator core support
The headlights on a 2001 Toyota Landcruiser are changed by opening the hood, disconnecting the wiring harness to the lights, and twisting the bulb. A new bulb can then be put in place and the harness reattached.
The headlights on a 2005 Chevy Optra are changed by opening the hood, removing the wring harness from the headlight assembly and twisting the bulb. A new bulb can then be attached and the assembly locked into position.