The washers aren't required for iron heads.
yes you need to replace head bolts
If the head is removed you must always replace the bolts.
Same as small block. 3/8's inch, NC, (16 threads per inch) and I would use 2 and a half inch long, with lock washers. The head of these bolts will need a 9/16ths inch wrench.
how tight should we tight the head gasket bolt for a ford f150 Need to know the engine size.
Yes. 20.99 at autozone for me yesterday, they are torque specific so they need to be replaced.
3/8" Allen wrench.
Remove the inside door panel. There are three bolts with nuts & washers that hold the mirror onto the truck. If your windows are manual, the crank level will need to be removed.
Yes, always install new head bolts.
i need the head bolt torque on a 04 chevi cavallier engine 2.2 DOHC
You need 54mm bore bolts for a caliper for a 1998 Chevy Prism.
I need the torque and secuense for the hea d bolts for a Chevrolet Malibu 2000 3.1
the longer (new bolts) are to torqued to 48lbs and the shorter ones are to be torqued to 45lbs then turn the bolts an additional 90 degrees the bolts need to be replaced with new one because they are streched when you torque them down