There are several writeups on yotatech.com and pirate4x4.com
You will need to splice wiring harnesses and clearance one spot if using the automatic transmission. If your vehicle had the 3.0 3vze engine you will need to move motor mounts slightly. Another swap which is gaining popularity is the 1uzfe 4.0 v8 used in Lexus sc400 and ls400. The 1uzfe will yield more power at a comparable price without sacrificing reliability.
96 4runner engine oil capacityi have myself a 1996 Toyota 4runner with 3.4l engine. this engine is called 5VZ-FE. i do have an original manual book for the car and that is what is says. if you change the oil with the filter it will take 5.2 quarts. if you do a change without replacing a filter - 4.9. well good luck changing your oil!
To put a 1996 7.3 powerstroke engine into a idi diesel truck you would have to transfer the ecm and the entire engine wiring harness over the old truck, the 1992 is a non-electronically controlled engine and the 1996 cannot run without a computer because it has high pressure electronic unit injection. This swap is possible, but very difficult.
On a 1996 4runner the transmission shift solenoid is under the pan in the valve body. There are two shift solenoids on the 4runner.
Check your dates and restate the question. Is it a different year 4 runner or a different 1996 model.
opel tigra 1996
nope
In the undercarriage
how to replace alternator on Toyota 4 runner 1996
No.
under the back seat
18.5
They were used on the 1992 - 1996;Engine: 5SFEChassis: SXV10