The system must be reset after the engine oil replacement. Reset the system by the following procedure:
1. Turn the ignition key to the "OFF" position with the trip A reading shown.
2. Turn the ignition key to the "ON" position while holding down the trip meter reset knob.
Hold down the knob for at leat 5 seconds. The indication light flashes and the bars displayed in the odometer disappear gradually. The odometer indicates "000000" and the light goes off.
If the system fails to reaset, the light will continue flashing. "
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
A maintenance light on a Toyota Camry can be reset by your mechanic after you have the work done that is needed. You also may be able to get instructions by checking your manual.
How do you reset maint read light on 2010 corolla
maintenance with engine
Have you tried looking in your Owners Manual, it's in there.
Resetting the maintenance light on a 1999 Toyota Tacoma is very easy to do. To reset the light, take the battery cables off for up to one minute to reset the light.
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
disconnect the battery
I don't want to sound like a smartass but, the instructions on how to reset the light(which is really an oil change reminder) are located in your owners manual.
Your drivers manual should give you the information to reset the oil maintenance light.
Set it to trip A and hold reset turn ignition off then turn ignition on and maintenance light will flash and your done.
how to reset maintenance light on mercedes s550 amg