Hi!
First you need to get a harmonic balancer puller. This pulley is located on the bottom of engine. Remove the tire and plastic so you can see it. Get a socket that fits the bolt I would recommend using a impact gun to get the bolt out. After its out pull the pulley and the sensor is located behind it . Two bolts hold the bugger on , but it's set on a dowel so you may have to fiddle with it to get it off. Hope this helps!
Jim
Where is the crank shaft located on a 1999 Pontiac Bonneville? I have bought the part. Just can't find where it goes.
Did John Brennen convert to Islam
it should be on the right side right neer the belt
I have a 92 Bonneville thet needs a crank sensor how do you change it Crank sensor is on the pulley and the teeth on the pulley sits inside of it for a megnetic response for computer. It is held on by two small bolts. I changed my own on my 3.8L and my car doesnt want to shift correctly. You are able to adjust and its very picky where the correct position is.
The Camshaft Sensor is located right behind the crank shaft fly wheel and can be very hard to change out without consulting a mechanic first.
where is crank senser located on 2003 pontiac
Crank sensors are always located on the camshafts. The 1989 Pontiac Sunbird crank sensor is located on the head of the engine towards to end of the camshaft.
The crankshaft sensor is on the side of the engine behind the alternator. It is mounted close to the oil filter,
Does your vehicle have the LT1? if so there is no crank sensor.. there is an optic sensor in the distributor that controls all..
remove the front passenger wheel, remove the crank pulley, remove the crank sensor. you may need a GM special tool to remove certain bolts
it is on the engine
behind the harmonic balancer pulley, i believe.