Leave Belts on the pullys use a 32mm wrench turn clock wise, once its the fan is broke loose you can grab fan and spin off.
How do you change a fan clutch on a 1991 bmw528i?
how to remove the clutch fan on the 530i bmw
In order to change the drive belt on 2000 BMW 4 door 323I, you must remove the air filter box, loosen the hose clamp, remove the harness plus, and depress the clip to remove it. Unclip the hose from the air filter box and remove it from the vehicle. Next remove the fan and fan clutch assembly. Next remove the tensioner and remove the belt.
The fan is attached to the fan clutch at the front of the engine. It is held on by one very large nut (I think it's 32mm). Usually you will need to remove the plastic fan shroud first. The difficult part of this is that the nut holding on the fan is a reverse thread, the opposite of what you would expect it to be. You turn it clockwise to loosen. Also, you might need a special tool (Google "BMW fan clutch tool") to hold the fan clutch and keep it from turning when you remove the fan.
how do you remove the fan clutch on a 1992 318i 1.8 liter?
Please you check cooler system, fan, whewn idle overheat.
Visit www.trailvoy.com for a complete answer to the fan clutch change with pictures.
Yes it takes a 36mm wrench and a holder for the pulley to remove the fan clutch,
no
how to take off the clutch fan in 96 blazer,trying to change water pump?
Remove the shroud, un-bolt the fan&clutch. It comes off as 1 unit.
Lexus Ls 400