Take it to the dealer... :) Seriously. I had a 1998 elantra, and I believe up until 1999 they used what are called "captive" rotors. Basically meaning you have to disassemble the hub in order to remove the rotor. It's a royal PITA and I would highly recommend it not be attempted without thorough instructions.
it is a long and detailed process, look it up on youtube.
how to change out a horn on a 2008 hyundai elantra
how to change rotors on a 2001 Chevy lumina
How do I change my air filter on my 2005 Hyundai Elantra?
Tap on your 1995 Ford brake rotors with a hammer or mallet?æto loosen them. Slide the rotors off. Reverse the process to install your new brake rotors.
No, they are not pressed on.
The 1995 Hyundai Elantra EGR valve is located on the firewall in the engine compartment. The EGR valve will be on the passenger side of the firewall.
When rotors need to be changed usually the pads have worn down. It is always a good idea to change pads when changing rotors.
Change front brake rotors on a 1998 Hyundai Accent?
its a 10 gallon usually
As long as your rotors are not warped, or you have not let the brake pads wear to the point they defaced the rotors, there is no need to change them. Just install new brake pads. Rotors can last the life of the car.
Remove the wheel, the calipers and the rotors, reverse procedure with new rotors.
To change rear rotors on a 2001 Jetta, raise the vehicle with a jack. Then remove the wheel and the calipers. Finally, pull of the rear rotors.?æ?æ
Remove the wheels, calipers, then you have to jar the rotor loose and it should come off on its own. The center bolt is for the hub, not the rotor, so you don't have to take that off. If not, you would have to heat it up to loosen, then hit it again to get it off.
I have a 1998 Hyundai Elantra and had the rotors replaced, you will have to have a shop to do it because they have to be pressed off and then back on again with a specialized machine or tool. Of course unless you have that tool you can do it yourself. Good luck.
take off calipers and pull the rotors off the hub
How do you change the front rotors on a 2004 Chevy tracker
The elantra takes 4.5 qts with filter change
The 2001 Elantra take 4.5 qts with filter change
Tap on the rotors with a hammer, after removing the tire and wheel and the brake assembly. The rotors will come loose. Slide the rotors off and reverse the process.
I have an 02 Elantra and Below the Plug Reads " 1324" Double Check to see if they show the Numbers Below :)
how do you change valve cover gasket 2004 hyundai elantra
take tires off,change rotors take two bolts off change pads