Lift the front wheels off the ground and remove the tires. Near the top and bottom of the calipers are the two retaining bolts. You'll need an "allen" wrench to remove them. Once they're turned out they'll be a little difficult to pull the rest of the way, then you need to work the calipers out. Pull the rotors and have them turned or replace them. You'll need to push the caliper plunger back in. Then compare the new brake pads to the old ones, and decide how you'll install them. Then carefully remove the old pads and replace them, using a little of the blue brake adhesive. Then put the whole thing back together. The first time you use the brakes, make sure you have pumped them up, then drive slowly until you've verified that the brakes are functioning properly.
how to change front brake pads on a 1994 lexus es300
You will need a big screwdriver or small prybar, a small hammer, a large "C" clamp and a size 3/8" Allen wrench.
DOT-3 brake fluid.
Remove the tire and wheel from your 1994 Plymouth Sundance. Remove the brake assembly spring. The brake pads will come off. Reverse the process to install the new brakes.
believe it in the front grill or under the hood.
Lug wrench, metric socket set, "C" clamp
Pull the tires off and take the brake calipers off and the rotors will pull off.
The brake light switch may be bad or out of adjustment. The switch is located just above the brake pedal.
TIME TO GET THE TRANSMISSION REPLACED
How do you change front tire studs on a 1994 Seville sts
Lift the car, remove the tire, remove the brake shoe/caliper and remove the old brake pad. Put in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car to the ground.
Remove the tire and wheel from your 1994 Chevy. Remove the brake assembly. Tap on the rotors with a hammer or mallet. The rotors will slide off. Reverse the process to install the new rotors.