Remove two rear lamp bolt/screws from rear license lamp. Remove lacense lamp from rear bumper fascia. Remove license lamp bulb and socket from rear license lamp. Replace bulb and install using reverse procedure.
Remove the cover using a tork bit.
how to change the license plate bulb onLook at the rear plate , then get on the ground so you can look up to the underside of the bumper, where the plate is. There are two Phillips screws the hold your plate light, remove both, pull down gently on the light, then turn it co you can see the rear and with both Hans turn the socket and pull, there you will find the bulb. change it and do the reverse to install.
It is very easy to change the license plate light on an Oldsmobile Aurora. All you need to do is remove the license plate and look above where the plate was. There are bolts that are holding the light in. Unscrew the bolts and then replace the light.
how do you change the light bulb over the license plate on 2000 eclipse
how do you change the rear license plate light on a 1999 Buick Regal
how do u change the license plate light on a 2005 sienna
show please how change plate light on an 2007 nissan sentra
If your license plate light is out change the bulb in it, if you have taillights your fuse is good as the license plate light uses the same fuse as the taillights.
on the 2001 XZ3 I removed the license plate and used a flat head screw driver to slid the license plate light cover over and they "pop" out.
license plate light just pops out of the bumper with a screw driver.u can buy a new light at auto store or just change the light bulb
how to change 2005 equinox license plate light i removed the screws but it didn't release
How do I change the license plate bulb on a 1993 Lexus ES 300