You'll need to find a shop with a code reader that reads ABS computer codes.
yes, it does! its located on the back fender below the light!
for a 1997 olds aurora you have to press the engine "eng" button till you get to the "change oil now" then press and hold the reset button till it says "oil life 100%". it should be the same for a 96.
Either try disconnecting the battery for about 10 mins. or have vehicle scanned to determine the problem
When "low tire pressure" shows up hold down on the RESET for several seconds
The light is reset with a scan tool after the repair. There is not a button.
no reset switch in this system
i am replacing the starter on olds 1995 aurora
Trick question. there isn't a 94 olds aurora.
Answer can be found in your Owner's Manual. If you do not have one, you need one. Without an OM, maybe someone who owns an Olds Aurora can help you. Open Up the little door with all the buttons like MPG, Fuel Used... Push the ENGINE Button til the OIL LIFE is displayed then press & hold the reset button til it resets bout 6 seconds.
1,000,000#
You can buy, rent or borrow a diagnostic code scanner from most local auto parts retailers. They plug in to the port just below and to the left of the steering column.
1998 olds aurora altenator replcemnt