Want this question answered?
Drain the radiator into a container. Remove the upper hose at the engine end. Remove the 2 bolts in the thermostat housing and remove the thermostat. Clean the surfaces and install the thermostat and housing. Install the upper hose and refill the radiator.
You remove the old thermostat and install a new one.
Thermostat, water pump, radiator cap, headgasket, low coolant.
how du you replace a thermostat in Mazda pickup b2300 94
Drain the radiator into a container. Remove the upper radiator hose at the engine end. there is 2 bolts in the housing that hold the thermostat. Remove them and the thermostat and clean both surfaces. Install the new thermostat and housing. Install the upper hose and top off the radiator with a 50/50 mixture of antifreeze and water.
Drain the radiator into a container. Remove the upper radiator hose at the engine end. Remove the 2 bolts from the thermostat housing. Remove the housing and thermostat and clean both surfaces. Install the new thermostat and housing and the hoes. refill the radiator.
you need a diagram for the housing? theres nothing to diagram its possibly the simplist part on the whole car
How do I install rear coil springs on a 1996 Camaro?
on top of engine, to the left side of the throttle body. where the top radiator hose leads to.
A thermostat can be stuck open or closed. If the engine runs to cool it is stuck open. If the engine is running hot it is stuck closed. If you don't have these problems you should'nt have to change it.
Follow the top radiator hose to where it connects to the motor. In this housing, is the thermostat.
Show me you how to install window motor for 1992 Chevy camaro