answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you lower pool water below the skimmer?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

To put in a new skimmer does the pool have to be empty of water?

No you just have to get the water level below the skimmer after that you should have no trouble making repairs.


How far below the waterline are pool return fittings installed?

I believe that they need to be at least below the bottom of the skimmer so that, if the waterline were to drop below the bottom of the skimmer, the returns would not run dry. In my pool they are about 15-18" below the usual water level.


Does the main drain line in skimmer have water in it when closing the pool?

No. You cannot use the main drain to lower the water level below the skimmer. This is because the main drain is not really a drain. It only connects right back to the 3 port valve in the skimmer.


Will the filter be affected by water above the skimmer?

It won't work as a skimmer if your water level is above the skimmer. If you watch how the skimmer works, the water is pulled in over the skimmer door and it won't "skim" the floating debris off the surface of the water if the water level covers the entire opening, your skimmer will just suck in water that is below the surface. If you keep the water level so it's at least below the opening an inch or so, you should be o.k. If you've recently had alot of rain, you may need to drain some water out of the pool so your skimmers function properly.


How do you replace the poo skimmer door?

Drain the pool until the water level reaches two inches below the skimmer faceplate , remove the face plate using a screwdriver , remove the faceplate and skimmer , then replace the gasket and attach the skimmer and then the faceplate


Why is skimmer flushing?

The water in the pool is too low,


Difference of a pool skimmer and pool filter?

A pool skimmer is generally built into the side of or around the top of a swimming pool in order to skim debris from the surface of the water. A pool filter is built into the plumbing in order to filter fine debris from the water itself.


How do you know if the pool is too full of water?

If the water level is deeper than 1/2 inch below the top of the skimmer(s) - it's too high.


When closing an above ground pool Do you have to drain the water below the skimmer?

No, you do not need to drain your pool. In fact, it is way better to keep the pool full so as to save water replacement every spring and the fact that the pool cover will sit higher makes it last longer too. There is a product called an AQUADOR' that covers the skimmer opening much like a Tupperware lid that keeps the water in the pool. It is inexpensive, easy and earth friendly.


How do you close skimmer valve to drain water level below skimmer?

You don't have to close anything. Just use a short piece of hose or tubing to siphon enough water out to drop the level at least an inch below the skimmer box and inlet port. To siphon, place the entire length of hose into the pool and fill up, place your finger over one end and hang that end out of the pool, leaving the other end in the water. Gravity will take care of the rest.


Does skimmer location matter on an in ground pool?

Yes it can make a big difference to the amount of floating debris and dust that sinks into your pool. The ideal place for the static skimmer in a pool is down stream from the return jets (These are the jets that return filtered water to the pool) and down wind from the prevailing winds, this can be a bit more difficult to work out as the wind direction over a pool is strongly influenced by the building surrounding it. The fact is that very few pool builders get it right. if the skimmer ends up in the wrong position there is always the option of using a floating swimming pool skimmer skimmer. this type of skimmer is set to the suction of the pools filtration system and connected via hose to the vac plate over the leaf basket, It can be fastened in place or left to float free in the pool and will keep working regardless of water level, Check out the link below on floating skimmers


Can you fill a pool in winter time when it has evaporated?

Yes just keep in mind that the water level in most winterised pools is below the skimmer outlet.