answersLogoWhite
Chevy Trucks and SUVs
Chevy Venture
Heater Cores and Blower Fans
Ford Expedition XLT

How do you remove and re-install a heater core on a 94 Chevy Z71 truck?

767778

Top Answer
User Avatar
Wiki User
2015-07-16 18:58:08
2015-07-16 18:58:08

This is not easy. Get a manual from AUTOBOOKSONLINE.COM

It is under the dash on the passengers side of the truck. You shouldn't have to remove the whole dash.

1

Related Questions

User Avatar

Remove the water supply hoses from your 1992 Chevy S 10 pickup truck heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.

User Avatar

replace heater core in a 1991 Chevy work truck 1500

User Avatar

you need the special tool its about 30 bucks from snap on

User Avatar

need diagram for heater core for a 1994 Chevy truck.

User Avatar

How do you remove power steering pulley on a 1990 ck truck

User Avatar

Need to know what year and model the truck is. 1992 Chevy k2500

User Avatar

From the inside. you have to unbolt heater box

User Avatar

You will have to remove the whole instrument panel. Then lower or remove steering column. Then disassemble heater case. Best taken to a dealer due to possible steering column issues, not impossible though. is it the same as a 1998 heater core replacement

User Avatar

first you will have to remove your heater hoses going to your motor to the firewall take them off at the firewall, then there is a big box on your firewall, there is a bunch of screws holding it on remove them you heater core will be inside it.

User Avatar

The heater core resembles a small radiator.

User Avatar

You will need to remove the water lines from your 1995 Dodge Dakota truck heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.

User Avatar

cut seals and gently remove

User Avatar

remove the bed of the truck.....

User Avatar

This is about a five hour job, you need to remove the dash in the truck. It is recommended taking to a machanic for this repair.

User Avatar

Remove the dash, its located under the glove box. Becarefull it will puke out antifreeze!

User Avatar

Drain the water from your Dodge Ram truck cooling system. Remove the water lines from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.

User Avatar

According to the book it should be #12.

User Avatar

Take it to the dealer. Take it to the dealer.

User Avatar

Behind the dash on the passenger side.

User Avatar

Pull the top off of the black box on the passenger side of truck under the hood. Remove the two heater hoses. Remove the old heater core. Reverse the process. Top off the radiator with antifreeze and check again after a test drive. Enjoy the heat.

User Avatar

How do you change a flywheel on a Chevy truck? You can remove either the engine or the trans. Once you have either removed just remove the bolts holding the flywheel in place.

User Avatar

First, get a truck then roll the truck over the lander. .

User Avatar

If your asking this question you shouldn't be working on your truck.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.