Want this question answered?
If it's anything like my 01 montero 4x4, its not fun. you have to remove the wheel bearing, and repack it. takes time and patience. your better off taking it to a garage for this one.
In the front
Anchor and lift the vehicle. Remove tires to expose rotors and enclosing. They can be hard to remove so use a tool with force, remove center bracket then gently hammer out of place. Exchange old rotors for new. Return mechanisms and tires.
The number one cylinder on a 95 Mitsubishi Montero is in the front of the engine. It is on the left side as you face it.
You can find the PCV valve for your 1997 Mitsubishi Montero on top of the engine. The PCV valve will be in front of the air cleaner housing.
On a Mitsubishi Montero Sport, the front bottle, or tank, for the windshield washer fluid is right behind the passenger headlight in the engine. It is just inside the passenger front bumper.
how do you remove front rotors from a chev 2004 silveraldo crewcab not 4wd
First remove the right and left tires, and then proceed to remove the rotors. After you have replaced the rotors put them back on.
pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.
"http://wiki.answers.com/Q/How_do_you_change_front_rotors_on_1994_mitsubishi_3000gt"
I drilled out the bolts that held it in place because they were thoroughly rusted in place. Once that was done the rotors came off easily.
With the wheel off, remove the calipers, then the rotors just come off.