hello i need you help me tell me how to remove the cover light from a license plate i have a Ford focus se 2002 to put a new light
thanks willie
How do you remove the brake light cover on a ford focus
prise the chrome cover down from left hand side
on the 2001 XZ3 I removed the license plate and used a flat head screw driver to slid the license plate light cover over and they "pop" out.
To fix a license plate light on a 1995 Dodge Colt you must first remove the screws holding the light cover in place. Remove the light from the bumper completely. Remove the license plate light bulb from its socket and replace with a new bulb. Place the light assembly back in its place in the bumper. Secure the light assembly in place with the screws you removed.
Remove the cover using a tork bit.
If you're talking about a Focus, there is a panel in the trunk area.
Remove the plastic cover on the outside and just pull the bulb out
It is very easy to change the license plate bulb in a 2001 Dodge Intrepid. You will need to remove the tag and then unscrew the light cover. After the cover is off, unscrew the light and replace with a new one.
change it from the inside
It depends on the vehicle. Generally, there are screws that hold on the cover, and you would remove them to remove the cover. Then you twist out the bulb and replace it the opposite way. Then you reinstall the cover/lens the opposite of the way you removed it.
Use a small screw driver or somthing that you can use to pry of the lense. Once you have done that you can change the light.
Changing a rear license plate light on a 1991 Toyota Corolla will be very easy to do. You need to take the license plate off and then unscrew all the plastic screws holding the light cover in place. After the screws are out, remove the cover and unscrew the old bulb and replace it with a new one.