There are four bolts that hold the seat to the frame of the car. Put seat all the way forward and take out the 2 back bolts - then move seat back to take out the front bolts and the seat should come right out. If it is a power seat you have to disconnect the electrical wires first - obviously. Had to do this not long ago....good luck!
The intermittent power window module for your 1996 Chevy Lumina can be found inside of the driver door. You will need to remove the door panel in order to access the power window module.
remove the 2 bolts andharness
Drain the oil from your 1996 Chevy Lumina oil pan. Remove the oil pan retaining bolts. The oil pan will come off.
A 1996 Chevy Lumina transmission will hold four and a half quarts of oil. A 1996 Chevy Lumina will also hold 12 quarts of transmission fluid.
No, they are 2 totally different bodystyles
i wnt to know how to dis-assemble a transmission in a 1996 chevy lumina
Begin by removing the rear speaker covers in your 1996 Chevy Lumina. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker. Reverse the process to install your new speakers.
Remove the bottom radiator hose on your 1996 Chevy Lumina radiator. Put a water hose in the top of the radiator. Allow the water hose to run until the water draining from the bottom of the radiator runs clear.
I just want to see a picture of the chevy lumina pushrod
most luminas you need to remove the tank the pump is in it
I had to remove the air intake to get to it.Easy then.
how to change timing cover gasket on a 1996 chevy lumina