Those three slot looking holes on the front of it are hiding the actual threaded bolt holes. If you shine a light in them, you will see the threads back inside. You need three 6mm x 1.0 bolts x 70mm-80mm in length for your puller. Most pullers won't have these bolts and you'll have to go to the hardware store.
The flywheel has to be held in place by a holding tool, Remove the mounting bolt, then use a balancer remover to pull the harmonic balancer.
I tried to change the harmonic balancer of my biuck lesabre 1994, but i can't remove the old one, the bold in the center is very , very tight and i don't know the type of screw, right or left turn.
To remove the harmonic balancer from a Nissan Maxima, first you need to removed the center bolt. After that, you can use a puller to remove the harmonic balancer. Before you do this, make sure you disconnect the battery and remove the drive belts.
With a balancer puller tool. With a balancer puller tool.
On most newer cars, the crank pulley is one piece with the harmonic balancer.... Remove it with a harmonic balancer puller.
The harmonic balancer tool is made especially to remove the balancer. Some stores will loan you the tool with a deposit.
use a harmonic puller
Its refered to as a harmonic balancer, and you have to have a special tool to remove it called (surprisingly) a harmonic balancer removal tool. The installation tool is a good heavy hammer and a block of wood. If you dont have access to this special puller, you can (and likely will) damage the harmonic balancer, so it would be best in that instance to take it to your local mechanic and ask him to take pull it off for you.
Go to Autozone and tell them u need a harmonic balancer puller
Remove upper core support, remove radiator, remove belts, using a hormonic balancer puller(specific for chrysler) remove balancer.
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
You need a balancer puller to remove it , It don't just slide off.