Want this question answered?
Remove the wiring harness from the back of your 2005 Chevy Cavalier heater blower motor. Remove the heater blower motor retaining bolts. Remove the heater blower fan.
Remove the wiring harness from the back of your 1980 Chevy Camaro heater blower motor. Remove the blower motor retaining bolts. Remove the fan from the front of the blower motor. Reverse the process to install the new blower motor.
Remove the wiring harness from the back of your 1996 Chevrolet blower motor. Remove the blower motor retaining bolts. Remove the fan from the blower motor. Reverse the process to install your new blower motor.
check for a blown fuse that says heater or blower motor
The a/c heater blower motor resister is located in the vehicle on the passengers side inside the housing next to the blower motor...............Remove the blower motor resistor wire harness connector.Remove the blower motor resistor screws.Remove the blower motor resistor.
To replace the heater blower motor: First unplug the wire connectors. Then remove the screws and the motor will pull out. Reverse the process to reinstall the blower motor.
The 1975 Chevrolet Camaro heater blower motor can be found behind the passenger side dashboard. You will need to remove the passenger side kick plate in order to access the heater blower motor.
Begin by removing the wiring harness from the back of your 1974 Beetle blower motor. Remove the blower motor retaining bolts. Remove the blower motor fan. Reverse the process to install your new blower motor.
Fig 15 Blower Motor ResistorNOTE: The blower motor resistor is located on the lower right side of the heater housing.REMOVAL# Remove lower right underpanel silencer/duct. # Disconnect wiring connectors on blower motor resistor. # Remove blower motor resistor retaining screws. # Pull blower motor resistor out of heater housing.
The heater blower motor can be found beneath the passenger side dashboard. Remove the wiring harness from the back of the blower motor. Remove the blower motor retaining bolts. Reverse the process to install your new blower motor.
Remove the glove box. The front blower motor and the resistor can be accessed from there.
below glove box remove heater/air conditioning cover then remove blower motor cover