hit it with a hammer done a few of them only thing holding them on is them four bolts get them out beat it off with a hammer
After you have released the tension from the belt, remove the 2 obvious bolts that hold it to the engine block.
remove belt pump is accessable remove bolts make sure coolant is drained first replace
number 8 reverse torque
You can feel around for the bolts and wires once you remove them you have to twist and flip the starter to remove it it sucks a hoist will help and lots of light ... small hands/fingers too
1.Disconnect negative battery cable. 2. Climb underneath and locate the starter. 3. Disconnect cables and wires on starter. 4. Remove bolts holding starter in place. 5. Remove starter. Installaton is REVERSE of removal
Remove the headlight by taking out the three 10mm bolts on top and unscrew the bulb from the backside.
Bell housing bolts and the torque converter bolts.
Remove the bolts, remove offending fan and replace with new one
autozone.com current vehicle upper left choose car repair info vehicle repair guides hope u find it from there
17
The 1997 Pontiac Sunfire front bumper is held in place by six retaining clips and for retaining bolts. Remove the retaining bolts and pry outward on each retaining clip.
The 1995 Pontiac Grand Am center console is held in place with for retaining bolts. Remove the shifter knob. Remove the center console retaining bolts. The center console will come off.