First off PVC is a pipe... the correct term would be PCV. Your PCV valve should be on the driver side valve cover. All you have to do is pop it off carefully & replace it with the new valve. Just bought one for a 1987 Dakota 3.9V6 was only like $15.00.
On my '02 Dakota the PCV valve is on the driver's side valve cover. .
It goes in the side of the housing with the oil filler cap on to.
on top of your valve cover on the passenger side of pick up should be white and look like an L. It just pulls out there is really no need to replace it you can clean it with WD 40
It is in the top of one of the valve covers.
To change PVC valve on a 1993 Nissan 300zx, first remove the oil dip stick and remove the tension clip from the PVC valve hose. Then remove the hose and the old PVC valve. Replace with a new PVC valve.
how remuve and remplece pvc
how to replace pcv valve on 2006 e150 ford van
It is the small plastic elbow that is on the top of the valve cover.
Passenger side valve cover
It is in the driver side valve cover, you must change the valve cover to replace the PVC valve.
PVC Valve Removal & Installation # Disconnect the oil separator hose from the PVC Valve. # Remove the PVC Valve from the grommet in the crankcase. Grasp the valve and gently remove it from the grommet in the passengers side valve cover. Remove the valve from the hose by carefully twisting it out. # Inspect the grommet for deterioration. To Install; # If necessary, replace the crankcase grommet. # Install the PVC Valve. # Install the hose.
You don't fix it, you replace it.