Want this question answered?
A blower resistor can be replaced, in your 2002 Oldsmobile, by removing the resistor wiring. Remove the retaining screws. Reverse the process to install the new resistor.
How do you replace a fan blower resistor on a vauxal Corsa?
Bad electronic resistor / blower module - replace.
The blower motor speed resistor is burned out. You can replace only the resistor but the resistor probably burned out because the blower motor is going bad. If you want to fix it for good, replace both the blower motor and blower motor speed resistor.
how to replace blower resister on a 325i BMW 2002
It is on the evaporator case and is held in with 2 screws.
check the blower motor resistor
# Locate the blower resistor under the right-side of the instrument panel # Disconnect the electrical connector from the blower motor resistor # Remove the blower motor resistor mounting screws and remove the resistor from the housing # Installation is the reverse of removal
On the evaporator case.
have you checked the fuse if so then you will need to replace the resistor for the blower hig and low dettings have you checked the fuse do you have 12 volts to blower if so then you will need to replace the resistor for the blower replace the blower motor
Check to see if you are getting power to blower motor - if so replace blower motor If not check fuse, switch, resistor pack.
Blown fuse? Bad switch?