answersLogoWhite

0


Best Answer

Take the two or three bolt out of the housing. Make sure you have a tub under the motor to catch the coolant. Break the seal on the housing. Remove the old t-stat. be sure to clean the surface on the housing as well as the surface on the engine head. Put the new t-stat in the dead. (be sure it in the right way) Put gasket sealer on the new gasket and place on the head. Place the housing on the gasket being carfule to keep the gasket in place. Replace the bolts. Be sure to tighten them evenly or you will break the housing. Make sure bolts are snug. Relace coolant. Start engine and check for any leaks.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace a thermostat on a 1995 silverado Should you replace the housing when you do this also on a truck this old?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

1996 BMW 328i Should you replace the thermostat housing when you replace the thermostat or just the existing housing gasket?

Unless the housing is damaged, there is no reason to replace it. Just replace the gasket.


How do you replace the thermostat on a 4 cylinder 1996 ford ranger?

follow the top radiator hose to locate the thermostat housing, remove the hose from the housing then unbolt the housing. remove and replace the thermostat and rebolt the housing to the motor, replace the hose The housing is made of cheap metal and should be replaced. It is important to "seat" the thermostat properly. Also, it is much easier to replace and remove the thermostat housing if you first remove the timing belt housing.


Where is the thermostat located and how do you replace it on a 2001 Grand Prix GT 3800 Series?

can you show me governor for grand prix and how can i take it of. thermostat should be located on the left side of the motor inside thermostat housing housing needs to be remove to replace thermostat


How do you replace the thermostat located on a Oldsmobile Ninety-Eight?

Follow the top radiator hose over to the engine and where it connects to the thermostat housing. There should be two bolts holding the housing to the motor. Remove the housing and replace the thermostat and gasket. The larger side of the thermo goes in the engine.


How do you replace a temperature sensor on a 2003 Saturn Vue?

If you do not know how to replace it, then you should not try to replace it. If you want to know WHERE it is, then look near the thermostat housing.


How to change thermostat on 2000 Honda Civic?

First locate the lower radiator hose, that hose should lead you to the thermostat housing (just behind the motor and to the left). This hose should be the same size as the top radiator hose. Second you move the clamp (pliers will work) down the hose away from the thermostat housing, then loosen that hose from the thermostat housing. Third you take of the 2 Bolts off from the thermostat housing, they should be 10mm. Remove the thermostat. When you replace the thermostat you may also need to replace the gasket. Simply put the bolts back in and tighten them, then reattach the lower radiator hose and move the clamp back to its original position. Note: The top radiator hose does NOT lead you to the thermostat housing!


How much should it cost to replace a cracked thermostat housing on a Toyota freelander?

4 to 6 hundred dollars


Where is the thermostat located on a 1995 cavalier 2.3 liter?

Follow upper radiator hose to housing at engine - thermostat should be in this housing Follow upper radiator hose to housing at engine - thermostat should be in this housing


Do you need a thermostat gasket or just a housing ring when changing thermostat for 91 acura legend?

You should use a thermostat gasket along with the thermostat housing ring. The gasket should be replaced every time the thermostat housing is opened.


How do you replace thermostat on 2003 tc 3.8?

Should be located in a removable housing at the engine end of the upper radiator hose Drain about 1 gallon of coolant from the radiator Remove this housing Note how thermostat is installed Clean both surfaces Replace thermostat and gasket Replace housing Start engine and look for leaks Run engine to normal operating temperature with heater on Re-check coolant level


How do you change the thermostat on a 1995 Pontiac Firebird?

take apart the thermostat housing and pop it out be sure and replace the gasket too. There should be two bolts holding it together.


Where do you find the thermostat in a 1995 Chevy Silverado?

follow the upper radiator hose from the radiator toward the engine. the housing that the hose attaches to holds the thermostat. it should look like a little elbow housing held down by two bolts. it'll be part of the water pump.