It may only be the resistor pack or the resistor module depending upon your climate control type.
The blower motor relay is located underneath the glove box on a 2006 Chevrolet Trailblazer.
The blower motor relay is located underneath the glove box on a 2006 Chevrolet Trailblazer.
about 5 min.
The blower motor speed resistor is burned out.
To replace a blower motor in a 2006 Chevrolet Colorado first remove the old blower motor. Then install the new motor making sure to connect all the wires.
Remove the wiring harness from the back of your 1996 Chevrolet blower motor. Remove the blower motor retaining bolts. Remove the fan from the blower motor. Reverse the process to install your new blower motor.
i had a 03 Chevrolet Colorado, and the resitor was located under the glove compartment, where the motor blower is, the resistor is screwed to the side of the blower. hope this works for you. the resistor is usually located there.
i cant tell you how to but you can replace it with a carburetor
Look at the link I posted, that should help you. (:
it needs a blower motor resistor to make the fan settings work.If you replace the Blower MOTOR Resistor it should resolve the problem.
Remove the wiring harness from the back of your 1993 Chevrolet Camaro blower motor. Remove the blower motor retaining nuts. Remove the fan from the front of the blower motor. Reverse the process to install the new blower motor.
To replace the heater blower motor: First unplug the wire connectors. Then remove the screws and the motor will pull out. Reverse the process to reinstall the blower motor.