Replace the hinge pins and bushings.
I need passenger door hinges for my chevy aveo 2007
how to replace actuator on a 2000 malibu
Your local auto parts store can sell you an inexpensive tool to remove and replace that door detente spring. Other hinge parts such as the pin and roller for the door detente and hinge pins and bushings are also available.
need to replace door hinge pin on 189 mitsibushi Triton tray back
I found an excellent web page that walks you through this step by step: http://bodyshopzone.com/archives/mechanical/door/hinge/pin_replace_1.html
You can replace the top door hinge with bottom hinges on the 1992 as long as the hinge is for the cab doors. The hinges for the tailgate would not work on the doors.
I would recommend you replace the entire hinge and forget about repairing it. In my experience this is the best route to take.
Replace door moulding
The price to replace these items can be anywhere from 20 dollars to 450 dollars. It depends on where you go to have it done and what they charge.
break off the bottom bushing that hold door pin pick up on the door slightly use a hammer and screw driver to drive pin out and replace
Replace all the door hinge pins and bushings. By doing so it will realign the door back to where it belongs.
jack the door up on the end of it and unbolt the hinge and replace with the new one.
you might need to replace the hinge pins.. or the complete hinge
You have to replace the whole hinge assembly, they don't make a hinge pin kit for the Thunderbird.
To fix a car door that is sprung due to a bent or damaged hinge, the best thing to do is replace the hinge. If the hinge is welded and not bolted to the vehicle, the entire door will have to be replaced.
dealer parts department?
THERE IS A CHANCE IF THE DOME LIGHT IS STAYING ON IT IS NOT THE THE DOOR SWITCH, BUT WORN DOOR HINGE BUSHINGS,
To replace the door hinge pins on a 1997 Jimmy you will need to open the door up. Place two jack stands on the front and back of the door's length at the bottom portion of the door for support. Remove the damaged hinge pin with the proper socket. Place the new hinge pin in place and secure it.
Open your doors, you may need to remove your fenders .Then find the nuts for the hinges, remove the nuts while supporting the door. Be careful of your door. Remove the hinges from the frame, replace, follow through in reverse.
There is a bolt on the side of the hinge.If you loosen the bolt, the hinge comes apart and you can lift the door off the hinge.You will need to remove the door panel and remove the wiring harness before you can remove the door.
need to replace door hindge pins and bushing,how do we get door off safely.
door hinges attached to door and hinge post
replace the door hinge pins and bushings. The latches never need adjusting. You can get these at autozone in the red HELP packages most of the time.