DIFFICULT _--_ 1- REMOVE TIRE__ 2- fender liner__3 - use vice grip chain wrench to hold balancer, > turn bolt with one inch breaker bar - chain wrench hits frame__with impact wrench have lots of air. 4 - pull off balancer with puller - tough pull. Recommend, find a solid metal balancer, rubber will detoriate again.
When sensors are changed, computer settings will be changed and car will not run until reset. Hurrah for computers and rubber parts, business is great. Car is out of date for dealer. To reset computer in car - 1 - need computer or lap top computer__ 2- program and adapter_3- found on internet.
yes
It's just behind the harmonic balancer.
YOUR LOCAL AUTOPARTS STORE WILL RENT YOU A PULLER AND SHOW YOU HOW TO USE IT.
The bolt is stuck and can't seem to come off.
at the front of the engine,next to the harmonic balancer
You need a harmonic balancer puller, and a 1/2 in drive inpact wrench.
The flywheel has to be held in place by a holding tool, Remove the mounting bolt, then use a balancer remover to pull the harmonic balancer.
sounds like the rubber damper is worn on the harmonic balancer. if this is the case you will have to replace the harmonic balancer.
Actually, you don't replace the sensor itself. The crazy thing is part of the harmonic balancer, and you have to replace the whole thing.
no it;s behind the harmonic balancer take off passenger right front tire and you can get at it. you will need a wheel puller to pull the harmonic balancer off
it is behind the harmonic balancer.
Behind the harmonic balancer.