Take off door panel and on the inside of the door is a sliding latch pull it out this will release the lock. all the rest is just accessed the same way inside the door frame just detach all bolts and pull out.
In the compartment where the jack is. It is in a black box by the pillar. Open lid and remove circuit board and replace it.
To take the drivers side lock out of a 1990 4runner you will first need to remove the door cover panel. Once the door cover panel is removed you will have access to the lock and can replace it.
You have to lift the handle before you lock the door.
Sounds like you need to replace the drivers door lock actuator.
how do you replace rear door lock assembly on 92 pONTIAC tRANSPORT
Type your answer here... How to Replace a Lock Actuator | eHow.com go to eHow.com and type in Replace Honda pilot door Lock Actuator replacement
You have to lock the car with a key. You can't push the lock down with the door open if you have power locks. They do this so that you can't lock your keys in the car.
If your drivers side door won't open, try spraying some WD-40 into the area where the door connects with the lock inside the car. This will lubricate the lock.
drivers door will not lock without the key all other doors work fine. All i want to know is how to fix it.
If the door is open. or any door is open. All doors will lock but the drivers door. I guess so you don't leave keys in. That's how it works on my 99.
The first and cheepest thing to check is the fuses. located on the side of the dash by the passengers door, another is under the hood on top of the battery. The next would be lock switch.It is easily installed, no tools needed. The drivers side power switch is a master switch. This means that power feeds from the drivers lock switch to the passenger door. If your key fob will unlock and lock the doors but the switch will not I would replace the drivers door lock switch.
The 2001 Chevy S 10 Blazer power door lock relay switch is located inside of the drivers side door. You will need to remove the drivers side door panel in order to access the door lock relay switch.