Drain coolent, if old dispose of properly, remove belt, disconect hoses on water pump, remove fan cover, remove water pump. take fan off pump, put on new pump, seal gasket, install pump. Replace items in order reversed order you removed them. Refill coolent, turn motor on check for leaks, top off coolent. Check coolent again after motor has cooled down after test drive.
The obd port on a 1990 Dodge Dakota is under the hood, along the firewall..
1990 dodge dakota 5 speed manual 2 wheel drive 4 cylider
All weep-hole's should be on the bottom center of the water pump
The plug-in for a code reader on a 1990 Dodge Dakota is located under the hood along the firewall.
You can get a 1990 Dodge Dakota fuse diagram in the owner's manual. You can also find it at select auto part stores.
Yes, there is a fuse panel diagram for a 1990 Dodge Dakota. It is found on the back of the panel cover and it can be found in the owners manual.
My 1990 dodge Dakota sport V6 gets around 450 miles on a tank of gas doing mostly hwy driving.
O2 sensor on 1990 Dodge Dakota is located on passenger side of exhast before catalytic converter. Most likely it has 4 wires.
Dodge Dakota V6's didn't have a crank sensor until 1992.
Inside the distributor
1987 to 1990 should be similar
approx 15 psi
they are self adjusting
For the 1990 Dodge Dakota : The 2.5 litre four cylinder engine has a timing BELT The 3.9 litre V6 and the 5.2 litre V8 engines have a timing CHAIN
Under the hood, passenger side of the firewall.
When fixing or changing a radio in a car, a wiring diagram will help make sure things are connected correctly. A wiring diagram for the radio of a 1990 Dodge Dakota can be found in its maintenance manual.
That requires a scan tool.
go buy a reference manual
yes but you have to make modifications
It is under the hood along the passenger side firewall.
Where is the Water Pump located and how do you replace it on a 1990 Chevy Corsica?