0
How do you replace valve stem seals on a 1989 Chevy pick up with 305 engine?
Wiki User
∙ 16y ago
Most auto parts stores sell a kit that includes an air fitting adapter for the spark plug hole, an over-center tool to compress the spring, and a set of instructions. You'll need the kit, an air compressor, a set of seals, and a couple hours of your time.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you replace valve stem seals 1989 Jeep?
How do you replace valve stems and guides on a 1989 Jeep 4 Cylinder engine?
How do you replace the valve stem seals on an 88 305 small block Chevy engine?
You can purchase a kit at most auto parts stores that includes an air fitting and a compression tool to remove the locks and change the seals.
Does the head have to be removed to replace the valve seals?
No the valve seals are between the cam and the head, under the valve spring
How can you tell the difference between intake valve and exhuast valve on a 1987 Chevy 305 want to replace valve stem seals but intake and exhaust are different seals which one is which?
intake valves are the larger valves or if you count from from either end its number 2,3,6,&7 valve
What causes a Chevy 350 engine to blow heavy black oil out of the tailpipe?
bad rings or really bad valve seals.
How do you replace valve seals in 1994 3000GT?
remove heads seal oil drain so seals dont fall in. then loosen and remove seals. replace and put engine back together. may need special mitsu. tools
How much does it cost to replace valve seals?
When asked from a mechanic about replacing the valve seals on a 5.0 V8 mustang engine, i was quoted 300-400. I have yet to take him up on that offer. This is in the 20164 zip code area.
Is it normal to inspect valve seals when doing a valve job?
It is normal to replace them.It is normal to replace them.
Why does your Chevy 350 smokes blue every now an then?
If you notice it when you first start the engine, it could be bad valve seals and/or loose guides.
How do i replace the purge valve on a 1997 Chevy Monte Carlo?
How do i replace the purge valve on a 1999 Chevy Monte Carlo
How do you replace valve seals in a 1996 Saturn SL1?
You replace the valve seals on a 1996 Saturn SL1 by removing all of the hardware to get to the valves, unseating them, cleaning them, and sliding the new valve gaskets on. In order to do this you should consider getting a good Chiltons or other repair manual for your make, model, year, and engine.
What causes oil to be blown out of the exhaust?
bad piston rings or bad valve seals. valve seals are easy but time consuming to replace, while piston rings mean a total engine rebuild. sometimes, you can remove the sump, and get the pistons out from underneath.
