Check inside the passenger compartment under glove box - there should be a small hole (about the size of a pencil) there may be a switch inside
With key on (engine not running) depress this switch with a pen or pencil
If so equipped that should reset
How to reset the oil change light
For a 92, also will work for a 90 or 91, if you have the touch screen you push the INFO button and then select the oil life option and there will be a reset option on the top right of the screen. If you don't have the touch screen then press the ENG DATA button a few times till the oil life is displayed and then press and hold the reset/enter button for 5 seconds while the oil life is displayed and that will reset your change oil light.
Push the odometer trip reset till you get to "oil" then press and hold down till it reads "100"
Have the problem repaired and they will reset the light. If you DIY then disconnect the negative battery cable for 5 minutes. If that does not reset the light you will have to have it reset with an OBD2 scan tool.
hold the engine reset button in until it resets
Reset the change oil light on Mazda 3
Your owners manual should tell you how to reset the light.
how do you reset change the oil light in a 2004 alero?
on the drivers side there is a fuse panel on the dash. there you need to press the reset button once and then your change oil light will blink. then you want to press it again and the low tire pressure light will blink hold the reset button until it beeps and then let go and then press the reset button again and the light should disappear. Hope this helps!
Key on Engine off Step on the gas pedal three times within five seconds.
Listed in your owner's manual. However, the reset pushbutton performs two functions. The first function is to find or select the change oil light. The second function is to reset the change oil light. So, when the manual says press the reset pushbutton, it means to press and release, press and release, press and release, ... and so on.... until the change oil light is selected. The change oil light is selected when it begins to flash on and off. Once the change oil light is selected by it flashing on and off, press and hold the reset pushbutton again in solidly to actually reset the light. Hold the reset pushbutton in until the chimes sound. This confirms the change oil light is reset and the light should go out.*Remember* before you even begin resetting using the reset button, the car must be in neutral or park or it will not work.AnswerIf you do not have an oil change reset button located on the drivers side inside the fuse panel. Turn ignition key to the on position (with engine off). Depress accelerator pedal 3 times. Oil change light should blink and you should here a beep, light will go out. Turn ignition key off.
Have vehicle scanned to determine the problem
Disconet the battery for 15 minutes this will reset your oil change light
Your owners manual should tell you how to reset the light.