what kind of Pontiac ?front wheel drive? The outer unscrew, there is a knoch on the shaft comming out of the rack. inner is a little harder you need a special socket.
how do you repair an inner tie rod for a 96 Pontiac sunfire no repair,replace with new.
how to change a tie rod on a 1992 ford ranger xlt
first jack the vehicle up safely. then remove wheel, then remove cotter pin on outter tie rod, then remove the nut then unsrew the outer tie rod, the remove the inner tie rod boot. then install a long socket just for inner tie rods use 1/2 inch rachet then reverse procedure, then take van for an alingnment.
The inner tie rod is part of the Rack and pinion set. VERY expensive.
You need to change a tie rod on a 4 year old vehicle?? What a piece of crap!! SELL IT!!
There is it is called a inner tie rod tool, but you can also get them off with a crowfoot wrench
picklefork tool. sometimes the complete tie rod has to be replaced
you need a inner tie rod tool
To access a tie rod the Tracer needs to be safely raised and supported. Remove the wheels and lower ball joint. Mark and remove the outer tie rod. Install the new tie rod to the proper marking. Reinstall everything and take the car to receive an alignment.
how to replace a tie rod on a 2002 chevy calivier with a 2.2 motor?
It is possible that the shaking in a Pontiac Montana at 45 MPH is the result of failing bearings or tie rod ends.
The tie rod is a rod acting as a tie in a building or other structure. A tie rod is also referred to as a rod in the steering gear of a motor vehicle.