The heater motor on the Peugeot 306 is under the glove box, in the passenger footwell.
First, remove the sound proofing panel, this clips off. Inside you will see the fan assembly is offset towards the left side (towards the passenger door hinge). There are 3 screws which need to be remove, 2 of which are towards the front, near the 3 pin electrical block which supplied power to the heater blower motor.
Unscrew the 3 screws after removing the electrical connector. A sharp tug downwards will free the motor itself, and a little twisting and turning will remove it. You should be able to do this in about 10-20 minutes usually.
Replacing is simply the reverse of this. I would suggest that any replacement motor is tested before you fit it in, it takes only a few seconds to test and will save you time.
Could be a Faulty relay.
fanbelt on a 306 hdi how do fit it
is it difficult to change a heater matrix on a t reg puegeot 306 td
plug it
Yes. Most peugeot parts are interchangeable.
really easy fix! what model 306 is it? regards, Simon
how to remove indicator stalk and cowl from Peugeot 306 lx
To change the wiper blade on a Peugeot 306 unclip the old part from the mount. Take the new wiper blade and slide it into place until it clicks.
i dont know how to fit a stater moter!!
Try changing or cleaning out the stepper motor, this controls the idle and is a common fault on the 306.
A Big Hammmer or angle grinder
no se como cambiarlo