0
Ok I'll bite. On our '92 Suburban (284k mi) it is located on top of the engine at the back of the intake manifold UNDER the distributor. Be prepared to remove the air cleaner and the distributor so number the wires. The original sender required a 1-3/16" wrench (how many folks have one of those) and of course the new one needed something different, slightly less than 1-1/6"(metric). Not terribly difficult other than finding it and I'll take it over to my auto shop guy to get the timing nailed down; I was able to get it close enough to get it started. This is the link I found a drawing that helped me located the unit on the engine: http://autorepair.about.com/library/illustrations/bl283a-lib.htm
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you check the oil pressure?
You need to remove the oil sending unit and install a oil pressure gage in it's place then start engine and read gage. Iwould tell you were the sending unit is but you did not say what you are working on. You need to remove the oil sending unit and install a oil pressure gage in it's place then start engine and read gage. Iwould tell you were the sending unit is but you did not say what you are working on. You need to remove the oil sending unit and install a oil pressure gage in it's place then start engine and read gage. Iwould tell you were the sending unit is but you did not say what you are working on.
How do you change the oil pressure sending unit on a PT Cruiser?
The oil pressure sending unit on a PT cruiser can be found on the upper front cover of the engine. Remove the retaining nut and the sensor will come out. Reverse the process to install the new sending unit.
How do you change 96 cadillac deville sending unit seal?
Oil pressure sending unit is located by oil pan in front. Unplug unscrew and install new one
How do you install a sending unit in a 83 Chevrolet pick-up?
There are several sending units in that vehicle such as the fuel sending unit, the oil pressure sending unit, the temperature sending unit. Need to know which one you want to change.
Why would oil pressure gauge flicker?
Low oil pressure or a defective oil pressure sending unit.Low oil pressure or a defective oil pressure sending unit.
Does no oil pressure mean I need a new engine oil sending unit?
You can hope so. If you install a new sending unit, you will find out if it is something worse. Loss of oil pressure can indicate low oil level, damaged oil pump, a broken sending unit wire, a defective gage or a worn-out engine.
How do you install a mechanical oil pressure gauge on Chevy 350?
Screw out the oil sending unit. Put a "tee" back into the hole. Screw in the oil sending unit for the light AND the fitting for the mechanical oil gauge.
How do you install a oil pressure sending unit?
Locate the engine's oil pressure sensor, remove it and add T-branch between. Then attach the oil-gauge's/unit's oil-line to the T-branch.
Where is a oil pressure sending unit on a 1986 chev cavalier?
The 1986 Chevrolet Cavalier oil pressure sending unit can be found on the left-hand side of the engine. The oil pressure sending unit will be above the oil pan.
Where is oil pressure sending unit for 1998 Mitsubishi mirage?
Were is the oil pressure sending unit on a 95 mitsubishi miaage
Where is the oil pressure sending unit 05 gmc sierra?
The oil pressure sending unit on a 2005 GMC Sierra
How can you test the oil sending unit on a 1991 Capri?
Either replace it or install a manual gauge to determine actual oil pressure
