Want this question answered?
Takes about 19 hours all up to replace clutch plate pressure plate and thrust raceproviding you have access to a hoist.
To replace the clutch disc in a 1991 Acura Legend you must first remove the engine from the vehicle. Loosen the pressure plate by adjusting the bolts and remove. Put the new one where the old one was and tighten the bolts.
Clutch chatter, clutch slippage and difficulty getting transmission into gear when stopped.
very carefully.
You will need to remove the transmission. Remove the clutch plate retaining bolts. Remove the clutch linkage. Remove the clutch retaining bolts.
BAD clutch slave cylinder, wore out clutch and pressure plate.
It is notadjustable, You either have a bad clutch slave cylinder, clutch master cylinder. The clutch and pressure plate may just be worn out.
You can't aprrently on a hyrdraulic clutch, which these have that adjust automatically.
See if your public library has a Chilton's for your car to replace the clutch.
I think they're cable operated. No fluid required.
ask the mechanic from the Nissan company
Replace clutch master cylinder and bleed system,also check your slave cylinder for leaks.its bolted to your transmission,the clutch cable is connected to it.