0
curly curly
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you set the base timing on a 1997 350 with a timing light?
trying to set base timing on a 97 Chevy c1500 with a 5.7 engine the wire to disconnect to set base timing is ?
What isn the base timing on a 01 dodge ram 360?
Base timing is set to 0 deg with a scan tool. You can not do this with a timing light.
91 s10 2.8l 5spd what should base timing be set at?
The timing should be set at 10:4.
How do you set timing on 1999 7.4 liter Chevy?
Use a timing light with vacuum advance disconnected set base timing to 6 degrees
How do you time your Saturn 2003 L 200?
depends on if your trying to set the time on the timing chain or trying to set the base timing for the computer. The base timing is fixed by the PCM/computer. for setting the time on the timing chain consult a service manual
How to set the timing on a 1997 350 Chevy?
you don't the ECM will do it for you. xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx You need to set the base timing on any car/truck that has a distributor. There is a tan/black wire that is usually under the dash down low on the passenger's side. This is the Electronic spark timing and the connector has to be apart to set the timing. That will put the computer offline while you set the timing to the specifications. There is usually a decal under the hood. Once the timing is set then reconnect the connector The base timing is set NOW the computer will take over from there.
How do you set the timing on a 98 350 Chevy?
That requires some one that has an OBD2 engine scanner and KNOWS how to use it. The timing is electronic controlled. You can set the base timing by ear.
What is timing set at on 1988 5.0?
I have a 1990 and factory setting for base timing is 10 degrees, I believe.
How do you set the dist timing on a 1999 gm 7.4 engine?
You can set the base timing by ear, But to be able to get the check engine light to go out and to set the timing were it is supose to be requires a engine scanner. The computer controlls the timing on that year engine.
How do you set the timing on a 1992 Volkswagen Passat GL 2.0 liter?
After disassembling to expose timing belt, look for TDC and ATDC timing marks. Align them, allowing 43 centimeters. Set BTDC mark in like manner.
How do you set ignition timing on a 2002 Chevrolet 1500 4.3 liter v6?
You can set the base timing by ear good enough to get it running. But you will have to have a engine scanner to set the timing correctly. The timing is controled by the PCM. POWER TRAIN CONTROLL MODULE.
What is the timing set to on a 94 Chevy 350 in a truck?
8 degrees btc Timing should be at 0 degrees ATDC that is factory XXXXXXXXXXXXXXXXXXX You need to set the base timing on any car/truck that has a distributor. There is a tan/black wire that is usually under the dash down low on the passenger's side. This is the Electronic spark timing and the connector has to be apart to set the timing. That will put the computer offline while you set the timing to the specifications. There is usually a decal under the hood. Once the timing is set then reconnect the connector The base timing is set NOW the computer will take over from there
