The problem that they are getting on is the ABS control unit, it has to be changed all along with the brake pump. I have the same problem with my Mazda 6, i got it checked at many service stations including the main dealer, the ABS control unit has to be changed.
Good luck all with finding the part cause i have been searching for it for about 2 months in used parts and new parts but no luck. at the end i had to order it from Japan from the Mazda Factory.
The computer has detected a problem with the ABS ( Anti-lock Brake System ).
only way to turn off an ABS light is to fix the problem in the brake system that originally turned the light on
It could be something as simple as a faulty or out of adjustment emergency brake switch. If that's not it, it could be the ABS. Often when the ABS fails the computer will turn on the emergency brake light.
If your brake light is on that inducates that your brake fluid level in the brake master cylinder in your engine compartment is LOW ( assuming that your emergency brake isn't on ) Having a low brake fluid level will also turn on your ABS light
Your emergency brake is to tight on the back brakes, which is not allowing the ABS to work properly. that's why both lights are on. Good Luck
The ABS (Anti-lock Brake System) light is on because the ABS module detects a problem with the system. The ABS light will remain on until the problem is fixed. Once fixed, the ABS light will reset itself.
to fix the problem in the brake system
too warn you that something is wrong with the brakes like you need calipers or pads
brake and abs light on , on 1994 Chevy Cavalier Z24
No , the brake light should come on when you press the parking brake pedal , but the ABS light should not come on
By having the Anti-Lock Brake System, (ABS) repaired. The computer has detected a problem with the system.
There is a brake light recall that fixes this problem. Just take it to your dealer and the repair is free.