from my 1997 Chevy Blazer s10 the whole thing has to be removed. If u want a really good durable shifter it will run you about 135.00 to 300.00 but if you get the shifter you can get the knob you want. The floor columns on the 90's blazer before 97 were screw off knobs and easy to remove but GM had to make it complicated and cost u more money!
lightbulb in shifter is blown. remove shifter cover to replace bulb
If your Toyota has a manual transmission, the fluid will be put in by removing the gearshift, and literally pouring the fluid into the cavity under the shifter.
probably down on the transmission where the cable attaches
== ==
Help
DAT stands forDash Automatic Transmission (Shifter is on the dashboard/instrument panel)
It sounds like the transmission shifter linkage is disconnected.
On a manual transmission the bushing is located below the top cover of the transmission. remove the shifter boot and unbolt the 3-4 bolts that hold the shifter down.only available from your local dealer.
Why is the shifter on Manuel transmission so wobbelie
how do you remove the automatic transmission from the 2004 wrx.... i have everything disconnected except for the gearing fork shifter.
the shifter cable or rods whichever it has needs adjusted.
For an automatic transmission, check the side of the transmission by or at where the shifter linkage goes into the trans. For a manual transmission, check under the shifter boot.