I'm not sure if I understand your question. I'm sure your getting plenty of gas to the plugs; just no fire from your distributor. If this is the case then the first I'd check (since you say you just rebuilt it) is that the wiring harness is plugged in firmly to the distributor. If it is plugged in then you need to take a plug wire loose and see if you are getting spark by arcing it on the block.
ok if your not getin gas to plugs try a new carb or rebulding the one you have its probley the plungers in the carb are stuck other then that the carb might not be set right or the timing might be out 360 degree
what is the ignition timing for a 1988 Chevy 454 engine
how do you set the timing for a 1997 Chevy 350 5.7 engine
Timing for 1990 1500 with 4.3
how do you adjust the timing on a 1977 350 Chevy engine k-10
The 1.8L engine uses a timing belt, while the 1.4L engine uses a timing chain.
That requires an engine scanner to set the timing.
It requires an ENGINE SCANNER to set the ignition timing on that year of engine.
engine timing
It does not have a timing belt, That engine has a timing chain and gears and they normally last the life of the engine.
The timing mark on a Chevy Inline 6 engine is located on the flywheel. It is a steel ball. The timing needs to?æbe located at 4 degrees BTDC.
It has a Timing Chain.
There is no timing belt in that engine. It has a timing chain.