0
Start with replacing the bulb.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Why doesnt the right turn signal and right tail light work but the right brake light does?
b/c your brak light is blown..and all the rest will work but that one.that or you have a fusa that is not working one of the 2
Why would the tailight on a 2000 Cherokee not work when the brake light that uses same bulb does?
because there is two filiments in the bulb one for brake and signal light and one for running light
Why do the tail lights work but the left brake light is out on a 1999 Toyota RAV 4?
Two filaments in the light bulb. One is the tail light, the other is the brake light.
Why left side brake light doesn't work when I step on the brake but works when the head light is on?
tail light bulbs has two filaments inside. One for regular lights and a second for brake lights. One filament is burnt out. Change the bulb.
Why might the third brake light not work if the others do?
Check the switch. It has a different one than the regular brake lights. the light bulb could possibly be blown
Why would the brake lights on your 1994 Corvette not function except the center high one which works fine?
AnswerTry checking your fuse for your tail lights in your fuse box if that doesnt work try check for a short in your wiringAnswerI noticed on my 1990 did the same. Also found out it only happens when the TILT wheel is completely down. Try lifting the tilt wheel up and down with someone watching your brake lights. Have not pinned down the source in the column yet, but will keep looking!!!The brake light switch is probably the problem. My '91 had the opposite - the brake lights worked but the 3rd light did not. The brake light switch has 2 terminals - one for brake lights and one for the 3rd brake light. Replace the switch.
Your 88 Chevy pu has brake light on the right and turn light but nothing on the left?
On mine, when the lights are off, the left brake light is faint but still works. When the lights are one, the running light is on (faint) but goes out when I hit the brakes. And the turn signal doesnt ever work. When Ive checked the light bulbs they burn out fast. I have been told that replacing the plastic bulb housing will fix this. But I have not tried it yet.
Why would brake light fuse keep blowing after stepping on the brakes a few times on a 1991 corvette?
It is possible that one of the bulbs is shorting out. Try replacing the brake light bulbs, if that doesn't work, troubleshoot the brake light switch.
1999 montero sport ive changed one of the tail light bulb it works when you turn the lights on but it doesnt work when you hit the brakes what do you do?
make sure u got a twin lement bulb one element is for tail light other is for brake light sounds like u just put wrong bulb in
What is the problem if you have tail lights but only one brake light?
The tail light/brake light bulb has two filaments. If one of the filaments is broken, you will get either only tail lights, or brake lights. If a new bulb doesn't work, then you have a broken wire or bad connection in your plug-in.
Why does your center brake lamp above the rear hatch work but neither of the rear brake lights work on my 2001 ford explorer xlt?
check your rear light bulbs. it is a two filament light and one is burned out.
You apply the brakes brake lights don't work but the turn signals light up?
They are two stage bulbs two bulbs in one one of the filaments must be out being the one for your brake lights enjoy If the bulbs check okay, check the brake light fuse, if the fuse checks okay, the brake light switch may be out of adjustment or faulty.
