Please expand your question. There are several components that can be replaced, not all are needed unless you want to do a complete overhaul. 323's were availabel as front disc/read drum or all wheel disc combinations. Thanks Malcolm
how do remove the brake drum on a 1991 mazda 323
The type of brake fluid a Mazda 323 made in 1997 uses is called Dot 3. This is the standard type of brake fluid for most modern cars.
I have a 1994 325i and I had the same problem. I went into the trunk and replace the light bulb for $5.55 and that was all it took. One blown bulb caused the same effect in my BMW, Good luck
White reservoir in upper right-hand side above battery.
Go to a mechanic :)
replace headlight on mazda sp20
Replace it. It is located somewhere on the brake pedal lever. The BPL is not intended for recreation use. Most installers should be advised by a BPL professional. If, in rare cases the left felangey is not appropriately wired, it can be replaced with a red brake wire from a 323 Cessna (The motor, however should not be used in the vehicle). There is another issue here however. Perhaps Clay should be replaced. Caveat: This DOES NOT apply to Cropdusters.
The factors of 323 are: 1, 17, 19, 323
323/323=1 :P
Please re-phrase your question; it appears you are saying the brake lights come on when you push the brake pedal and the lights are working (normal operation). If the lights are staying on after you release the pedal, then the problem is with th brake light switch (sticking). Thanks Malcolm
The factors of 323 are: 1, 17, 19, 323.
323 + (323 * 0.038) = 335.27400The answer is 335.274.