the 4t60-e transmission uses a shift modulator that can be found at most auto part stores. however i believe the '99 regals use the 4t65-e transmission which are not vacuum operated therefor to up the shift pressure you will need a tuner or a shift kit.
Where is the heater control valve on a 1994 Buick Regal
The modulator valve uses hydrological pressure to shift a transmission !
as far as I understand , it does not have a modulator. e4od are electronic. no vacuum shift modulator
im not sureven have one
the modulator valve does not have a screw, however, the modulator located outside the modulator valve may or may not have one.
Answer DIAGNOSE,whitr exhaust smokecould be either 1/ perforated diaphragm on the auto transmission MODULATOR VALVE. OR a LEAKING cylinder head gasket(or cracked cyl head) see IF using water if NOT then probably modulator valve
* modulator valve
the pcv should be near the front valve cover
On a 1993 Buick Regal 3.1L, the PCV valve is located on the intake manifold. It is situated underneath the MAP sensor.
Hey George==A modulator valve is on the trans and tells the trans when to shift. If the trans gets to shifting crazy you might change the modulator. GoodluckJoe
The PCV valve for a 1999 Regal 3.8 is located on the top of the valve cover. The valve pulls out to replace it.
the PCV valve is located on the valve cover of a 1991 Regal Custom. It is plugged in and can be easily changed.