Caliper retaining bolts. Torx T-40 or T-45
Front disc brake caliper bleeder screw: between 13-18 ft. lbs
.The 2000 Chevrolet Monte Carlo brake caliper bolt size is 9/16. The brake caliper bolt can be purchased at most auto-parts stores
Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper In my opinion you have to change front lower arms' bushings.
Two mounting bolts at rear of caliper - then slide caliper off rotor
you have to remove the caliper to access the brake pads
According to the 2000 Ford Expedition Owner Guide : ( DOT 3 brake fluid ) meeting Ford specification ( ESA-M6C25-A )
A 3/8" Allen wrench will remove that bolt on the front caliper.
No, the 2004 Durango is a completely different brake system.
Remove brake caliper and caliper frame. Rotors are now free.
Probably has a sticky brake caliper or sticky brake caliper sliders. Who ever replaced the brake pads should have seen that.
Remove caliper mounting bolts Slide caliper off rotor Use a "C" clamp to fully retract piston into caliper body If parking brake is used on this caliper piston is threaded and a special tool (not expensive) is required to thread piston into caliper body
Its on all 4 wheels on the brake caliper.