which spec are you looking for?
58 lbs
22re rod bolt torque
Torque the head bolt on a 1993 Toyoto 22RE three times at 58 foot pounds of torque. The 22RE head bolts are not torque-to-yield (stretch), and are re-usable. Torque is 55-63 foot pounds. Thoroughly clean the bolts on a wire wheel and inspect for pitting, especially in the threads and replace as necessary. It is also recommended to re-torque them after about 1,000 miles. ChaCha!
Bolt pattern and torque specs are here: http://toyota.offroadforum.cz/aarc.epnet.com/application/8578/8578R03_Cylinder_Head.html
Torque Value For 1987 R22, Per Haynes Manual - 58 ft lbs.
head torque is 55lbs for turbo
Hp: 116 Torque: 140 lb/sqft Redline: 5800rpm Compression Ratio: 8.1:1 Oil capacity: 4.8qts
65 ftlbs
Torque as follows 53-63 ft/lbs. in 3 steps
90 ft lbs is the standard torque on most flywheels
torque specs of what?
The 1983 Ford F 100 manifold bolt torque specifications are 45 pounds. The manifold bolts should be torqued in 15 pound intervals.