Head Gaskets and Valve Covers
Chevy Lumina
Grand Am SE
Grand Prix SE

Torque specs for a 1996 lumina 3.1 head bolts?


Top Answer
User Avatar
Wiki User
2007-06-01 18:56:38
2007-06-01 18:56:38

33 ft lbs and an additional 90 degrees


Related Questions

For the 1996 Chevy S-10 4.3 liter, the torque specs for the crankshaft damper bolts is 70 ft. lbs. For the cylinder head bolts, the torque is 65 ft. lbs, and for the engine mount-to-head bolts, the torque is 35 ft. lbs. For the engine mount-to-frame bolts, the torque is 52 ft. lbs.

46 foot pounds on short bolts 54 foot pounds on long bolts + 90 degees

the torque for the cam shaft are 9lbs/foot

This is a multi step process. 1. Torque all bolts starting in the middle and working your way diagonally to outside bolts torquing to 29 ft/lbs. 2. Torque all bolts again in same pattern to 54 ft/lbs. 3. Final torque to 72 ft/lbs.

The 1996 Chevrolet Cavalier 2.2 liter engine had bolt torque specifications are 120 pounds. The head bolts should be torqued at 40 pound intervals.

Torque specs for a 1996 Pontiac Grand Prix 3.1 is 185lb-ft of torque at 4,000 RPM.

You can give your local NAPA a call, they should print out all the torque specs for your car or just give it to you over the phone. At least they do in VA.

The 1996 Ford Escort 1.9 liter engine cylinder head bolt torque specification is 120 pounds. The head bolts should be torqued in 40 pound intervals.

What are the torque specificatons for a 1996 v6 3.1 head on an oldsmobile achieva

"Roadwheel bolts....110Nm 81 lbf ft" per Haynes VOLVO S70, V70 &C70 1996 to 1999 Repair manual

The Haynes manual says the transmission pan bolts should be torqued to 10 ft/lbs.

What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?

Automatic transmission pan bolts torque specifications: 96 to 120 in-lbs. Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups & 1994-2005 Mazda Pick-ups, B=-s Series

What specs do you need? Torque for the gears or caps? Dimensions? TDC timing marks?

the 3.8 has 200 horses at 5200 rpm and 225 ft lbs of torque

Drain the oil from your 1996 Chevy Lumina oil pan. Remove the oil pan retaining bolts. The oil pan will come off.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.