Chevy Impala
Oldsmobile Cutlass 442
Chevy 350
1982-1994 Chevy Cavaliers

What are the torque specs for rocker arms on a 94 Chevy cavalier 22 liter engine?

303132

Top Answer
User Avatar
Wiki User
2005-11-02 05:05:52
2005-11-02 05:05:52

14-20 ft. lbs.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

The torque specification for the rocker arm nut on a 1997 Chevy Cavalier is 22 foot pounds. This is the equivalent of 30 newton meters.

User Avatar

what is the torque on 2.2 rocker arms and in what order

User Avatar

The 2000 Chevy Impala 3.4 liter engine rocker arm bolt torque specification is 45 pounds. The rocker arm bolts should be torqued in 15 pound intervals.

User Avatar

For the 1989 Chevy S-10 with the 2.5 liter engine, the torque setting for the rocker arm bolt is 22 ft. lbs. The torque setting for the rocker arm cover is 75-inch lbs.

User Avatar

There are no torque specs for a 350 Chevy. Follow the valve adjustment instructions in any repair manual for any small block Chevy.

User Avatar

No, head bolt torque is much higher than rocker arms.

User Avatar

Why are ets and engine light on in 98 Chevy cavalier

User Avatar

valve or rocker clearence for a 1995 chevy 2.2

User Avatar

i need to know what the torque specs are on the rocker arms for a 97 Chevy lumina, 3.1L v6

User Avatar

Rocker arms are set to a specific preload or backlash on v8 Chevies. There is no torque specification.

User Avatar

The correct torque for the rocker arm bolt is 14 Nยทm (124 lb in) plus 30 degrees.

User Avatar

The 1996 Chevrolet Cavalier 2.2 liter engine had bolt torque specifications are 120 pounds. The head bolts should be torqued at 40 pound intervals.

User Avatar

Mitchell information and Alldata both prublish that the torque values for this engine are 65-75 ft/lbs. Be sure you use the correct tightening sequence, This is important. In this application the sequnce is as follows: (HOPE THIS SHOWS UP RIGHT AS I TYPED IT.) < 9 5 1 3 7

User Avatar

The 98 Cavalier 2.4 is a NON interference engine.

User Avatar

i need the head bolt torque on a 04 chevi cavallier engine 2.2 DOHC

User Avatar

what are the torque specks for 85 Chevy s10 with a 2.5 engine

User Avatar

Where is the stater located on a Chevy Cavalier located?

User Avatar

will 2001 2.2 cavalier interchange engine parts with a 2000 cavalier

User Avatar

The 2001 Chevy Cavalier 2.2 liter engine cylinder head bolt?รฆtorque specification is 120 pounds. The cylinder head bolts should be torqued in 40 pound intervals.

User Avatar

you torque the bolts until they are good and tight

User Avatar

The torque numbers are different for each engine. Which engine and year does your car have?

User Avatar

As long as it is the same displacement. Liters/cid. It should

User Avatar

A lot of manufacturers use a torque setting, but not Chevy. With the motor running, go to zero lash, and then 1/2, to a full turn from there.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.